Service Bulletins

Below you will find service bulletins for UpRight machines.

If you are unable to find the service bulletin that you require, please contact us.

Please click on the links below to download PDF versions of the bulletins.

Model NameReferenceBulletin SubjectAffected Serial NumbersDate of Issue
X Series SBV.11.08 Service Bulletin mandatory machine inspection and weld repair to be carried out immediately X26N - 51172 to 51200 X26 - 53251 X32 - 53250 19/10/2011
MB20/MB26 SBU.10.02 Service advisory regarding the machine re-rating of the MB20 and MB26, in compliance with the European Machinery Directive (2006/42/EC) MB20 150 to 270 MB26 275 to 443 19/05/2010
XRT Series SBU.10.06 Service advisory to inspect the XRT manual platform lower 10000 to 10150 19/05/2010
AB46E SAU.10.04 Service advisory to reduce the electrical current loading on the main hydraulic pump motor 10025 to 10120 14/05/2010
TM12 SAU.10.03 Service advisory to change the lubrication of mast assemblies ALL 14/05/2010
TM12 SAU.10.03 Process instruction to change the lubrication of mast assemblies ALL 14/05/2010
UL25/UL32/UL40 SBU.10.01 Service advisory to inspect the power to platform flying lead on ANSI specification 220V AC UL Series machines 31089 to 31407 01/11/2010
AB46E SBU.09.04 Service advisory for the replacement of pivot locking pins (065214-000 and 065214-001) 10000-10011 10021-10075 10050-10075 30/03/2009
AB46RT SBU.09.04 Service advisory for the replacement of pivot locking pins (065214-000 and 065214-001) 10000-10011 10021-10075 10050-10075 30/03/2009
AB38 SBU.09.06 Service advisory regarding the machine re-rating in compliance with the European Machinery Directive (2006/42/EC) AB383301 to AB383977 AB384000 to AB384250 29/07/2009
MX19 SBU.09.06 Service advisory regarding the machine re-rating in compliance with the European Machinery Directive (2006/42/EC) 50440 to 52099 53000 to 53200 17074 17837 17852 20479 40075 40076 40108. 29/07/2009
X32 SBU.09.06 Service advisory regarding the machine re-rating in compliance with the European Machinery Directive (2006/42/EC) 50095 to 52000 53000 to 53099 29/07/2009
Snorkel Booms 421708 Protection of cylinder rods ALL 29/01/2009
AB38 SBU.09.03 MANDATORY requirement for (missing) adhesive to be applied to wheel studs to prevent detachment from the gearbox housing Applies to machines shipped between Jan 2004 - July 2007 Contact us for a full list of serial numbers. 25/03/2009
AB38 N/A Service advisory to fix the wheel studs, affecting all serial numbers. ALL 25/03/2009
X26/X26UN/X32 SAU.09.02 Service advisory to replace the wheel yoke retaining pin   22/01/2009
X27RT/X33RT SBU08.07 X27RT & X33RT wheel bolt torque setting 10000 to 10058 26/08/2008
X27RT/X33RT SBU08.07 X27RT & X33RT wheel bolt torque setting 10000 to 10058 26/08/2008
UL Series SBU07.09 Caster wheel mounting 30000 to 30886 23/01/2008
UL Series SBU07.09 UL Series - caster wheel mounting 30000 to 30886 23/01/2008
UL Series SBU.07.09 MANDATORY inspection of wheel mounts to ensure castor wheel assembly is securely mounted on the chassis 30000 to 30886 23/01/2008
AB38 SAU08.01 Service advisory to check and adjust forward & reverse elevated drive speeds ALL 22/10/2008
MX19 SAU08.01 Service advisory to check and adjust forward & reverse elevated drive speeds ALL 22/10/2008
SL26SL/SL30SL SAU08.01 Service advisory to check and adjust forward & reverse elevated drive speeds ALL 22/10/2008
TM12 SAU08.01 Service advisory to check and adjust forward & reverse elevated drive speeds ALL 22/10/2008
X26/X26N/X32 SAU08.01 Service advisory to check and adjust forward & reverse elevated drive speeds ALL 22/10/2008
K13 SBU08.02 Aerial K13 lower boom change Manufactured pre-Janaury 2003 19/02/2008
SL26SL/SL30SL SBU08.01 Service advisory to modify the floating axle control logic 50001 to 50209 10/01/2008
SL26SL/SL30SL SBU08.01 Floating axle control logic modification 50001 to 50209 10/01/2008
TL50 SB.07-04-23-04 MANDATORY inspection of the welds on the seam of the inner or Teleboom on the TL50 2031 to 2038 23/04/2007
AB38 SB07.07 AB38 Inner boom to transition welding AB383702
AB3838009
to9
AB383899
AB383900 9
to
AB383971
13/08/2007
AB62 AB.05.04-1 Service advisory to provide grease application point on slave cylinder head assembly 1000 to current 14/04/2005
TM12 SB04.01 MANDATORY installation of replacement platform due to insufficient powdercoat inside mast 7601
to
7649
7673
7677
01/02/2004
X32 SI04.01 Service advisory to install orifice in valve block lift/lower circuit 1000 to current 01/01/2004
SB60 SI.03.02 Service advisory to adjust of the turret swing gear engagement 1000 to current 15/11/2003
AB46 SA04.01 Service advisory to install gravity latch to satisfy the requirements of the Swedish Work Environment Authoritys Directive which was communicated on June 16, 2003 1000 to current
(Sweden only)
14/07/2003
ULII SA04.01 Service advisory to install gravity latch to satisfy the requirements of the Swedish Work Environment Authoritys Directive which was communicated on June 16, 2003 15000 to current (Sweden only) 14/07/2003
LX31/41/50 SB.03.01 Service advisory to ensure proper fit of front wheel motor hubs and inspect for possible damage to motor shafts 1300 to 4472 01/11/2003
MX19 SI.03.01 Service advisory to replace the 069199-000 battery charger with 069199-001 battery charger 17500 to current 01/08/2003
SL26RT/SL30RT SI02.02A Service advisory to Improve performance and reliability of Drive Motors 11200 to current 01/02/2003
SL26SL/SL30SL SI02.02A Service advisory to Improve performance and reliability of drive motors 11200 to current 01/02/2003
SL26RT/SL30RT SI.02.02 Service advisory to improve Performance and Reliability of Hydraulic Drive Motors 11200 to current 31/07/2002
SL26SL/SL30SL SI.02.02 Service advisory to improve performance and reliability of hydraulic drive motors 11200 to current 31/07/2002
LX31/LX41 SI.02.03 Service advisory for the installation of outriggers on LX 31 and LX41 Eurodiesel/12V 27/07/2002
TM12 SB.02.01 Service advisory to install a capacitor in the motor control drive circuit to ensure a 10 millisecond null input 5000 to 7027 10/01/2002
X Series SB.02.04 Service advisory to simplify the operation and improve the safety of the Gate Latch Assembly - Models with entry gate 1001 to 20116 01/12/2002
X27RT/X33RT SB.02.03 Service advisory to simplify the operation and improve the safety of the guardrail and gate locking pin assemblies 1000 to 3153 01/11/2002
X Series S1.01.02 Service advisory to inspect the pivot bolt in the brake linkage - Wide models 6012 onwards 31/01/2001
X20N SI.01.01 Service advisory to inspect the pivot bolt in the brake linkage 6012 onwards 31/01/2001
SL26RT/SL30RT SI.01.04 MANDATORY identification of the Model and Serial of white hydraulic brakes with potential weak braking at maximum gradeability 13782 to 13840 30/07/2001
SL26SL/SL30SL SI.01.04 MANDATORY identification of the Model and Serial of white hydraulic brakes with potential weak braking at maximum gradeability 13782 to 13840 30/07/2001
XRT SI.01.04 MANDATORY identification of the Model and Serial of white hydraulic brakes with potential weak braking at maximum gradeability 3041 to 3100 30/07/2001
SB60 SB01.03 Service advisory to enhance performance of the turret rotate 1000 to 1418 29/03/2001
X Series SI.01.03 Service advisory to make a wiring change at the upper and lower control box (excluding X20N) 15020 onwards 21/03/2001
LX Series SI.01.05 Service advisory to improve braking endurance   15/07/2001
MX15/MX19 SB01.02 MANDATORY enhancement of the braking system comfort 14000 to 17170 09/02/2001
SB60 SB01.01 MANDATORY installtion of case drain return line to the hydraulic tank 1102 to 1408 07/02/2001
XR Telehandler SB01.04 Service advisory to enhance the performance of the frame level and boom retract PET7, 137, 139, 140, 142, 143, 144, 149, 150, 151, 152, 153, 156 06/03/2001
SB80 SI.02.01 Service advisory to re-route tank line from hydraulic oil cooler directly to the pump, necessary in all cold-weather areas. ALL 03/01/2001
TM12 SB01.05 MANDATORY enhancement of the braking system comfort 5000 to 6554 01/05/2001
SB60 SB00.27 MANDATORY support of the cat track assembly 1342 to 1398 30/10/2000
SB80 SB00.32 MANDATORY replacement of front axle king pins 1337 to 1453 30/10/2000
AB46RT SB00.05 Optional enhancement of the engine perfomance - DF models 1000 to 2000 30/03/2000
MB20/MB26 SB00.30 MANDATORY replacement of trunking cover MB20 0002 to 0008
0011
MB26 0001 to 0003
0007
26/09/2000
SL20 SB00.24 MANDATORY weight addition to chassis 9359 to 9507 25/10/2000
LX31/41/50 SB00.26 MANDATORY performance improvement of outrigger operation 2747 to 4022 20/10/2000
LX31/41/50 SB00.25 MANDATORY enhancement of axle lock cylinder durability 3305 to 4022 20/10/2000
U-Drive 25 SB00.27U-drive MANDATORY enhancement of the electrical emergency stop circuit 1000 to 1050 20/10/2000
AB62 SB00.21 MANDATORY enhancement of fuel tank durability 1096 to 1188 20/09/2000
LX31/41/50 SB00.22 MANDATORY enhancement of outrigger durability, affecting models with outriggers 3198 to 3725 20/09/2000
X31N SB00.23 MANDATORY weight addition to chassis 13533 to 16067 20/09/2000
AB46 SB00.29 MANDATORY wheel installation inspection 2007 to 2073 19/10/2000
LX Series SB00.29 MANDATORY wheel installation inspection 3384 to 3548 19/10/2000
MB20/MB26 SB00.31 MANDATORY replacement of printed circuit board MB20 0001 to 0016
MB26 0001 to 0010
16/10/2000
SB00.04 SB00.04 MANDATORY enhancement in the performance of the Master Levelling Cylinder 1337 to 1436 10/03/2000
MX Series SI00.13.MX Service advisory to improve gradeability 12900 to 14000 08/06/2000
AB62 SB00.02 Service advisory to enhance the performance of turret rotation 1097 to 1120 06/03/2000
SB60 SB00.02 Service advisory to enhance the performance of turret rotation 1000 to 1318 06/03/2000
SB80 SB00.03 Service advisory to enhance the performance of the turret rotation 1337 to 1415 06/03/2000
SB80 SB00.02 Service advisory to enhance the performance of turret rotation 1337 to 1410 06/03/2000
LX31/41/50 SB00.01 MANDATORY Axle Float Cylinder Fitting Adapter position check, affecting 4WD models 100 to 3103 04/01/2000
LX31/41/50 SB00.20 MANDATORY brake durability enhancement, affecting 2WD models 1000 to 1409 01/08/2000
LX31/41/50 SB00.19 MANDATORY brake durability enhancement, affecting 4WD models 1000 to 1409 01/08/2000
LX31/41/50 SB00.18 MANDATORY brake durability enhancement, affecting 2WD models 1410 to 2746 01/08/2000
LX31/41/50 SB00.17 MANDATORY brake durability enhancement, affecting 4WD models 1410 to 2746 01/08/2000
LX31/41/50 SB00.16 MANDATORY brake durability enhancement, affecting 2WD models 2727 to 3755 01/08/2000
LX31/41/50 SB00.15 MANDATORY brake durability enhancement, affecting 4WD models 2747 to 3797 01/08/2000
AB38 SB00.09 MANDATORY performance enhancement of the main hydraulic manifold cartridge valves 1812 to 2032 01/07/2000
AB46RT SB00.11 MANDATORY enhancement of the durability of the front axle 1000 to 1900 01/07/2000
MX15/MX19 SB00.12 MANDATORY prevention of water ingress into the motor controller 14000 to 14167 01/07/2000
TL33 SB00.08 MANDATORY performance enhancement of the main hydraulic cartridge valves 1748 to 1771 01/07/2000
TL38 SB00.10 MANDATORY performance enhancement of the main hydraulic manifold cartridge valves 1225 to 1365 01/07/2000
TL38 SB00.07 MANDATORY performance enhancement of the main hydraulic and outrigger hydraulic manifold cartridge valves 1225 to 1365 01/07/2000
TL49 SB00.06 MANDATORY performance enhancement of the main hydraulic and outrigger hydraulic manifold cartridge valves 1317 to 1389 01/07/2000
AB38 SB99.4 MANDATORY - addition of Bushings to Lift Cylinder Trunnion mount 1500 to 1724 22/02/1999
LX31/41/50 SB99.9A Service advisory to enhance function of limit switch during outrigger operation, affecting US machines with outriggers 1000 to 2965 15/10/1999
LX31/41/50 SB99.9C Service advisory to enhance operation of limit switch during outrigger operation, affecting European machines with outriggers 2747 to 2965 15/09/1999
LX31/41/50 SB99.9B Service advisory to enhance operation of limit switch during outrigger operation, affecting European machines with outriggers 1000 to 2746 15/09/1999
SL20 SB99.10F Service advisory to enhance the performance of the electrical circuitry (12 volt toggle) 8193 to 8556 15/06/1999
SL20 SB99.10E Service advisory to enhance the performace of the electrical circuitry (12 volt toggle) 8000 to 8192 15/06/1999
SL20 SB99.10D Service advisory to enhance the performance of the electrical circuitry (12 volt joystick - proportional) 8193 to 8556 15/06/1999
SL20 SB99.10C Service advisory to enhance the performance of the electrical circuitry (12 volt joystick - proportional) 8000 to 8192 15/06/1999
SL20 SB99.10B Service advisory to enhance the performance of the electrical circuitry (24 volt toggle) 8557 to 9002 15/06/1999
SL20 SB99.10A Service advisory to enhance the performance of the electrical circuitry (24 volt joystick - proportional) 8557 to 9002 15/06/1999
SB80 SB99.15C Service advisory to increase performance of the boom extend/retract function 1300 to 1374 13/09/1999
SB80 SB99.15 Service advisory to prevent binding of the boom hose and wiring carrier assembly 1337 to 1339
1342 to 1365
13/09/1999
LX Series SB99.8 Service advisory to enhance drive mode affecting LX machines with outriggers only 1000 to 2177 11/10/1999
SB60 SB99.11 Service advisory to improve starting and charging performance - Gas models 1102 to 1258 11/10/1999
LX31/41/50 SB99.1 MANDATORY - service bulletin for LX31/41/50 with Kubota D905 and WG750 engines to install proper torque on HECO torque hubs 2298 to 2521 05/01/1999
AB46 SB99.5 Service advisory to filter control signal - Electric & Bi-Energy models 1000 to 1768 01/06/1999
AB46 SB99.2 Service advisory to adjust the engine idle speed - 2WD Diesel models 1000 to 1500 01/06/1999
AB46RT SB99.7 Service advisory to add timer to fuel shut off circuit - Diesel models 1189 to 1657 01/06/1999
SL26N/SL30N SB99.3C MANDATORY - enhancement of pressure protection of drive motors - Electric & Bi-Energy models 11200 to 12180 01/06/1999
SL26N/SL30N SB99.3B MANDATORY - enhancement of pressure protection of drive motors - Gas & Diesel models 11200 to 12180 01/06/1999
SL26RT/SL30RT SB99.3A MANDATORY - enhancement of pressure protection of drive motors 11200 to 12180 01/06/1999
SL26SL/SL30SL SB99.3A MANDATORY - enhancement of pressure protection of drive motors 11200 to 12180 01/06/1999
AB46 SB98.12 Service advisory to restrict the movement of the emergency hand pump lever 1000 to 1474 31/08/1998
AB46 SB98.14 Service advisory to isolate 12 volt circuit from accidental enegagement - Bi-Energy models 1190 to 1331 29/09/1998
SL20 SB98.13 Service advisory to improve brake reliability 8012 to 8550 29/09/1998
MX Series SB98.10 Service advisory to inspect both rear rear spindle/chassis welds 1000 to 8790 27/07/1998
X31/X32 SB98.3 Service advisory to reduce scissor brace end play 6186 to 8817 27/04/1998
SP37 SB98.9 Service advisory to increase protection against abrasion and wear on the electrical harness 1001 to 1345 24/06/1998
TL49 SB98.9 Service advisory to increase protection against abrasion and wear on the electrical harness 1001 to 1135 24/06/1998
LX Series SI98.1 Service Information - wheel nut torque 1000 to current 22/01/1998
LX Series SB98.5 Service advisory to replace exisiting outrigger cylinder pads and mounting hardware 1000 to 1870
(with optional outrigger kit)
20/04/1998
AB38 SB98.8 MANDATORY replacement of counter-balance valves 1500 to 1564
1568 to 1569
18/06/1998
MX15/MX19 SB98.19 MANDATORY - provide additional clearance between the drive motir guards and pothole protection bars 8791 to 9379
9381 to 9549
9553 to 9570
9572 to 9598
9602 to 9687
9691 to 9694
9698 to 9708
9714 to 9730
9732 to 9733
9759
12/10/1998
SL20 SB98.18 Service advisory to provide proper alignment of the lower linkage assembly 8000 to 8262 12/10/1998
TM12 SB98.20 Service advisory to install 4 grease fittings in the mast to permit periodic lubrication and instructions for installation 1493 to 3405 12/10/1998
AB46 SB98.11 MANDATORY - to ensure proper plug braking - Electric & Bi-Energy models 1001 to 1450 10/08/1998
SL20 SB98.7 MANDATORY - proportional controls, installation of relay kit and keyswitch kit 8000 to 8192 09/06/1998
SL20 SB98.6 MANDATORY - toggle controls, installation of relay kit and keyswitch kit 8000 to 8192 09/06/1998
SP37 SB98.4 Service advisory to replace slew gear box retaining hardware 1001 to 1360 07/04/1998
MX15/MX19 SB98.2 Service advisory to reposition down and tilt alarm 5851 to 6205 06/04/1998
SL20 SB98.17 Service advisory to improve the roll-out deck operation 8000 to 8574 05/10/1998
AB46 SB98.1 Service advisory to replace cage rotate and turret rotation control knobs 1000 to 1208 05/01/1998
SB60 SB98.16 MANDATORY inspection to assure proper propane supply to engine 1000 to 1197 01/10/1998
SL20 SB98.15 Service advisory to increase drive and lift speed 8000 to 8572 01/10/1998
LX Series SB97.6 MANDATORY replacement of outrigger component 1000 to 1544
(with optional outrigger cylinder kit)
30/07/1997
TM12 SB97.10 Service advisory to identify premature tire deterioration 2443 to 2758 28/10/1997
LX Series SB97.7 MANDATORY replacement of outrigger component 1000 to 1544
(with optional outrigger cylinder kit)
28/07/1997
SL26RT/SL30RT SB97.12 Service advisory to install axle cylinder kit 11002 to 11706 25/11/1997
SL26SL/SL30SL SB97.12 Service advisory to install axle cylinder kit 11002 to 11706 25/11/1997
AB46 SB97.11 MANDATORY installation of exhaust support bracket - 2WD Diesel models 003 to 1236 24/10/1997
UL Series SB97.4 MANDATORY replacement of lift cylinder assembly 17049 to 17116 18/06/1997
AB46 SB97.5 MANDATORY addition of doubler plates to chassis weldment - Electric & Diesel models 1000 to 1072
1074 to 1076
1078 to 1101
17/07/1997
TL49 SB97.1 MANDATORY outrigger cylinder replacement 1057 to 1120 12/01/1997
MX15/MX19 SB97.3 MANDATORY addition of diode to the electrical circuit 6206 to 6538 09/06/1997
SL20 SB97.8 MANDATORY steering diode poisition 7596 to 7710 02/10/1997
TL49 SB97.2 MANDATORY outrigger component reaplcement 1001 to 1056 01/02/1997
LX31/LX41 SB 96.1 Replace two position fuel selector switch with three position switch - Dual fuel models 1000 to 1025 28/02/1996
TL33 PB 96.1 MANDATORY electrical function modification kit 1133 to 1359 26/06/1996
TL49 PB 96.5 Emergency override modification 1003
1014
1015
1036
1038
05/06/1996
SL26/SL30 SB 96.3 Service advisory to adjust the throttle solenoid 8800 to 10752 01/08/1996
LX31/LX41 SB 96.2 Installation of mounting tab kit 1000 to 1136 01/07/1996
SL26/SL30 SB 95.1 Suggested modifications to minimise pump wear ALL up to 1995 16/02/1995
TM10 SB 95.3 MANDATORY installation of 4 grease fittings 1100 to 1211 01/04/1995
TM12 SB 95.2 MANDATORY installation of 4 grease fittings 1141 to 1492 01/04/1995
UR38TR SB 95.2 MANDATORY installation of 4 grease fittings 1000 to 1292 01/04/1995
X20W/X26N SB 94.13 MANDATORY replacement of the lift cylinder on X20W, and lift cylinder & kicker arm on X26N 1011 to 1739 01/03/1995
MX Series SB 94.5 MANDATORY installation of three labels 1028 to 1037 21/03/1994
X Series SB 94.6 MANDATORY installtion of one label 1017 to 1098 21/03/1994
SL14 SB 94.1 MANDATORY valve guard change 1000 to 1410 15/01/1994
SL14 SB 94.2 MANDATORY latch plate weldment replacement 1000 to 1387 11/02/1994
X Series SB 94.12 MANDATORY installation of relief valves between power unit and tank 1402 to 2157 10/11/1994
X Series SB 94.10 Scissor pin replacement 1000 to 1522 10/08/1994
MX Series SB 94.4 MANDATORY installation of shoulder bolt and locknut 1028 to 1035 10/03/1994
X Series SB 94.3 MANDATORY installation of shoulder bolt and locknut 1040 to 1071 10/03/1994
X20W/X26N SB 94.11 MANDATORY addition of lift relief valve 1000 to 1711 01/09/1994
X Series SB 94.9 Wiring check 1000 to 1061 01/07/1994
X Series SB 94.8 MANDATORY replacement of pothole protection spring assemblies with dual spring assemblies 1000 to 1380 01/07/1994
X Series SB 94.7 MANDATORY replacement of both rear axles 1000 to 1202 01/07/1994
SL20D SB 93.2 Steering improvement 4300 to 4582 01/07/1993
SL26 SB 92.2 Service advisory to change from 16 gauge wiring to 10 gauge wiring 8000 to 9107 13/04/1992
SL26 SB 92.1 Service advisory to lubricate the spline and pump shaft   09/03/1992
UL Series SB 92.3 UpRight lift power unit malfunction, affecting UL 220v AC units only with date code F492 8469 to 8570 05/06/1992
ANSI machines SB 92.4 Error in ANSI Responsibility manual   02/10/1992